AutoDS offers several settings to help you follow the price and stock updates of your suppliers. The main one is "Price and Stock Monitoring", which checks your suppliers' prices and stock multiple times a day and applies the changes it finds to your products. We also offer settings that help you define how AutoDS handles these updates and adapt them to your selling preferences, so you can avoid overselling and long delivery times.
You can find these settings for each supplier on the Supplier Settings page of your AutoDS account, in the Lister, Pricing, Orders, and General tabs. Because each supplier has its own settings, you can define different preferences for each one. We recommend configuring them before you upload products, so that new products follow your preferences from the start.
This article presents each of these settings, where to find it, what it does, and when a change reaches the products already in your store.
Key points about the monitoring settings
The "Price Monitoring" and "Stock Monitoring" toggles are responsible for the automatic monitoring of your suppliers' prices and stock. Always check that they are turned on in the Lister tab of each supplier. They apply to the products you upload afterward, and for the products already in your store, you use "Bulk Edit" or the "Edit" option of each product.
The "Price and Stock Monitoring" feature is not included in the Import 200 plan. For this reason, Import 200 has no monitoring scan.
"Ship to Country" and the warehouse region decide which stock and price AutoDS reads from your supplier. "Ship to Country" refers to the destination country, and you set it in the General tab of each supplier. The warehouse region refers to the location your supplier ships the products from, and you choose it when you add the supplier. AutoDS reads your supplier's price and stock according to both, and not all suppliers supported by AutoDS have the "Ship to Country" setting available in Supplier Settings.
In addition, "Minimum Product Quantity", "Maximum Shipping Days", "Choose from Suppliers Table", "Prime only", and "Walmart only" are other settings that impact monitoring. They are responsible for the stock, the delivery time, and the seller you accept from your supplier. You find them in the "Monitoring" section of the General tab of each supplier, and the supplier you select decides which ones you see.
These monitoring settings work together in each monitoring scan. AutoDS reads your supplier's price and stock according to the settings you chose, and then updates the buy price, the selling price, and the status and quantity of your products in AutoDS and in your store.
Changes to "Ship to Country", "Choose from Suppliers Table", "Minimum Product Quantity", "Maximum Shipping Days", "Prime only", and "Walmart only" reach the products already in your store with the next monitoring scan.
You can receive email notifications related to price and stock monitoring by configuring "Stock monitoring updates" and "Price monitoring updates" in the Notifications tab of Settings. You receive information about the changes AutoDS applies.
How to turn on and off Price and Stock Monitoring
The "Price Monitoring" and "Stock Monitoring" toggles turn on the "Price and Stock Monitoring" feature for each supplier. You find them in the "Price & Stock Monitoring Settings" section of the Lister tab, in Supplier Settings.
Both are off by default, so always check that they are enabled in each supplier's settings if you want AutoDS to monitor prices and stock automatically. You can turn each one on or off separately, so you can use one without the other. Learn how to open Supplier Settings here.
To turn on Price and Stock Monitoring for a supplier:
Select the supplier in the supplier list of Supplier Settings.
Open the Lister tab.
In the "Price & Stock Monitoring Settings" section, turn on "Price Monitoring" and "Stock Monitoring".
Click "Save".
The toggles apply to the products you upload afterward, and AutoDS monitors them with the next monitoring scan. To turn them off for a supplier, follow the same steps and turn off the toggles.
If a product still shows out of stock after your supplier restocks, check whether "Stock Monitoring" is on for that product.
For the products already in your store
Products already in your store retain their current monitoring status when you change the toggles in Supplier Settings, because those toggles apply only to products you upload afterward. You can change "Price Monitoring" and "Stock Monitoring" for these products using "Bulk Edit" or the "Edit" option for each product.
The same applies after you upgrade from the Import 200 plan to a higher plan: the products already on your Products page keep their status until you turn on the toggles for them.
To turn on Price and Stock Monitoring for several products with Bulk Edit:
Go to Settings → Supplier Settings → Lister, confirm that "Price Monitoring" and "Stock Monitoring" are turned on, and click "Save".
Go to the Products page.
Select the products you want to update with the checkboxes next to each product, or click "Select All" to choose all visible products in your current view.
Click the "✎ (Edit)" icon at the top of the list to open the Bulk Edit menu.
Click "+ Add item" and select "Stock Monitoring".
In the "Disable stock monitoring" field, select "No".
Click "+ Add item" again and select "Price Monitoring".
In the "Disable price monitoring" field, select "No".
Click "Update" and wait for the confirmation message.
The Bulk Edit fields ask whether to disable monitoring: "No" turns Price and Stock Monitoring on for the selected products, and "Yes" turns it off.
To turn on Price and Stock Monitoring for one product:
Go to the Products page.
Click the three-dot menu next to the product and select "Edit".
Turn on "Stock Monitoring" and "Price Monitoring" for that product.
Click "Save".
To turn them off for a single product, follow the same steps and disable the toggles. AutoDS updates the products with the next monitoring scan.
How the monitoring settings work together in each monitoring scan
Each monitoring scan of the "Price and Stock Monitoring" feature follows your monitoring settings in the same order, and knowing that order helps you see which setting is responsible for each change in your store. AutoDS runs the steps below multiple times a day for products with the "Price Monitoring" or "Stock Monitoring" toggle turned on, and it does not check the supplier for products with the toggle turned off.
In each monitoring scan, AutoDS follows these steps:
Reads your supplier's data. "Ship to Country" refers to the destination country and the warehouse region to which your supplier ships the products, and AutoDS reads your supplier's price and stock according to them.
Compares the supplier's offer with your settings. "Minimum Product Quantity", "Maximum Shipping Days", "Prime only", and "Walmart only" are responsible for the conditions the offer must meet, such as the stock, the delivery time, and who ships or sells the product, and "Choose from Suppliers Table" is responsible for the alternative seller AutoDS follows on Amazon when the Buy Box seller is unavailable.
Updates the buy price and recalculates the selling price. With "Price Monitoring" on, AutoDS updates the buy price with your supplier's price and recalculates your selling price with the profit and fee fields of the Pricing tab. Learn how the selling price is calculated here. For most suppliers, if "Include shipping price" is turned on, AutoDS adds the shipping cost to the buy price before calculating your profit, and "Shipping Method Selection" in the Lister tab is responsible for the shipping option used for that cost.
Sets the status and the quantity of the product. With "Stock Monitoring" on, AutoDS sets the product to "Out of Stock" when your supplier runs out of stock, and places it "On Hold" when the offer does not meet one of the conditions of step 2. When your supplier restocks, AutoDS puts the product back live with the quantity you set for it, which is the quantity applied at upload with "Default Product Quantity" or any quantity you later set.
Applies the changes to your store and notifies you. AutoDS updates your store with the changes on the next monitoring scan, and sends the email notifications you turned on.
Between monitoring scans, the settings that protect your orders help when your supplier changes a price.
Ship to Country and warehouse region: which destination and warehouse AutoDS reads
In each monitoring scan, the "Price and Stock Monitoring" feature reads your supplier's price and stock according to where the products ship to and from.
Two settings are responsible for this: "Ship to Country", which refers to the destination country, and the warehouse region, which refers to the location your supplier ships the products from. Each supplier has its own settings, so you can set a different country and warehouse region for each one.
Ship to Country
In the General tab of the supplier, in Supplier Settings, you select the destination country whose version of your supplier's data AutoDS reads, including the price, availability, and delivery time. Selecting the same destination you choose on your supplier's website keeps the data in AutoDS aligned with what you see there, and a change reaches the products already in your store with the next monitoring scan. Not all suppliers have the "Ship to Country" setting, and you can learn which ones, and how to set it, here.
If your country is not in the "Ship to Country" list, or your store sells to several countries, you can select "Worldwide", and AutoDS then uses Canada as the reference country in each monitoring scan, so a product your supplier does not offer for Canada can show as out of stock in AutoDS even if it is available for the countries you sell to. If most of your buyers are in one country that is in the list, we recommend selecting that country instead. Learn more about the "Worldwide" option here.
If a product shows out of stock because of this setting, you can check and fix it.
Warehouse region
The location your supplier ships the products from is the warehouse region, and you choose it in the "Select Warehouse" field when you add the supplier with "+ Add Supplier" in Supplier Settings. For AutoDS to read the data you expect, the warehouse region and the country you select in "Ship to Country" need to match the country you sell to. Learn how to add a supplier with the right warehouse region here.
If a product shows out of stock because of the warehouse region, you can check and fix it.
Monitoring Settings in the General tab: stock, delivery time, and seller conditions
The Monitoring Settings are five settings, under Supplier Settings → General → "Monitoring" of each supplier, that are responsible for the stock, the delivery time, and the seller you accept from your supplier. The supplier you select decides which ones you see.
In each monitoring scan, AutoDS compares your supplier's offer with these settings, and when the offer does not meet "Minimum Product Quantity", "Maximum Shipping Days", "Prime only", or "Walmart only", AutoDS places the product "On Hold", with quantity 0 in your store. A change to any of these settings reaches the products already in your store with the next monitoring scan.
Minimum Product Quantity
AutoDS places a product On Hold when your supplier's stock falls below the lowest stock you accept, and you set that stock in "Minimum Product Quantity", under Supplier Settings → General → "Monitoring". The product stays On Hold until your supplier's stock exceeds that threshold or you change the setting. "Minimum Product Quantity" is different from "Default Product Quantity", which is in the Lister tab and sets the quantity your store shows for each new listing.
If a product is on hold because of this setting, you can see the reason and how to fix it.
Maximum Shipping Days
AutoDS places a product On Hold when your supplier's estimated delivery time exceeds the limit you set in "Maximum Shipping Days" under Supplier Settings → General → "Monitoring". The limit counts the delivery date, not the shipping date, and AutoDS checks each supplier's standard delivery estimate, excluding membership-specific delivery times such as Amazon Prime.
If a product is on hold because of this setting, you can see the reason and how to fix it.
Choose from Suppliers Table
For Amazon suppliers, AutoDS monitors the Buy Box seller first, and when the product is unavailable there, it follows the alternative seller you prefer in "Choose from Suppliers Table", under Supplier Settings → General → "Monitoring". "Cheapest First" selects the lowest-priced seller, and "Prime First" selects the Prime-eligible sellers first, so the setting influences the price and stock AutoDS reads.
If an Amazon product shows out of stock because of the seller AutoDS follows, you can check and fix it.
Prime only
For Amazon suppliers, "Prime only", under Supplier Settings → General → "Monitoring", keeps active only the products shipped from Amazon, which AutoDS identifies by the "Ships from" field of the Amazon product page. AutoDS places the other products On Hold, and when "Prime only" is turned off, AutoDS follows the alternative seller you choose in "Choose from Suppliers Table".
If a product is on hold because of this setting, you can see the reason and how to fix it.
Walmart only
For Walmart suppliers, "Walmart only", under Supplier Settings → General → "Monitoring", tracks only the products from Walmart membership sellers, so AutoDS places a product On Hold when the Buy Box seller is not a Walmart member.
If a product is on hold because of this setting, you can see the reason and how to fix it.
Settings that shape the buy price, selling price, and quantity of your products
The buy price, selling price, and quantity of your products are determined by the settings on the Pricing and Lister tabs for each supplier, along with the data AutoDS reads from your supplier. AutoDS recalculates the selling price with the profit and fee fields of the Pricing tab, such as "Fees", "Additional Profit in %", and "Minimum profit per product", and these fields apply to the products you import afterward, so for the products already in your store you use "Bulk Edit". Learn how the selling price is calculated here.
Include shipping price and Shipping Method Selection
For most suppliers, the shipping cost becomes part of your buy price when "Include shipping price", under Supplier Settings → Pricing, is turned on: AutoDS adds your supplier's shipping cost to the buy price before calculating your profit, so your customers pay it inside the selling price. "Shipping Method Selection", under Supplier Settings → Lister, is responsible for the shipping option AutoDS uses for that cost: "Cheapest", "Cheapest with tracking", or "Fastest with tracking". A change to "Include shipping price" or to "Shipping Method Selection" applies to the products you upload afterward. For a product already in your store, you turn "Include shipping price" on or off in the "Edit" option of the product, in the Pricing tab of each variant. Learn how here.
Default Product Quantity
The quantity your store shows for each new listing is the one you set in "Default Product Quantity", under Supplier Settings → Lister, and it is also the quantity AutoDS restores when your supplier restocks, unless you later set another quantity for that product.
A change applies to the products you upload afterward, and for the products already in your store, you use "Bulk Edit" on the Products page and select "Quantity", or you open the product and go to Variants → "Edit". A quantity of 0 places the variant On Hold with the reason "Default quantity 0".
To avoid selling when your supplier's stock is low, you can combine it with Minimum Product Quantity.
Email notifications about price and stock monitoring
AutoDS sends you email notifications about the price and stock changes it applies to your products when you turn on "Stock monitoring updates" and "Price monitoring updates", under Settings → Notifications → "Monitoring Notifications".
To receive them, the "Price and Stock Monitoring" feature must be enabled, and you need a plan that includes it.
To receive email notifications about price and stock monitoring:
Go to Settings → Notifications.
In the "Monitoring Notifications" section, turn on "Stock monitoring updates" and "Price monitoring updates".
In "Digital Email Frequency", select how often you want to receive the emails: "Daily", "Weekly", or "Monthly".
In "Notify to Email", enter the email address where you want to receive them.
Click "Save".
With "Digital Email Frequency" set to "Disabled", AutoDS does not send the emails.
Settings that protect your orders between monitoring scans
Between monitoring scans, your supplier can change a price before AutoDS updates it, and two settings under Supplier Settings → Orders protect your orders in the meantime: "Maximum Loss" is the loss you accept on an order, and "Maximum Purchase Order Price" is a fixed limit per supplier.
When an order goes above one of them, AutoDS stops the order, so you can review it and decide how to proceed. The "Force Resend" option places the order anyway, and it bypasses all protection settings, including "Maximum Shipping Days". Learn more here.
When a change reaches the products already in your store
A change to a monitoring setting reaches the products already in your store in one of two ways, depending on the setting:
With the next monitoring scan: "Ship to Country", "Choose from Suppliers Table", "Minimum Product Quantity", "Maximum Shipping Days", "Prime only", and "Walmart only" reach the products already in your store with the next monitoring scan.
For the products you upload afterward: The "Price Monitoring" and "Stock Monitoring" toggles, turned on or off, "Default Product Quantity", "Shipping Method Selection", "Include shipping price", and the profit and fee fields of the Pricing tab apply to the products you upload afterward. For the products already in your store, you use "Bulk Edit" or the "Edit" option of each product, and for "Include shipping price" you use the "Edit" option of each product.
The Import 200 plan does not include the "Price and Stock Monitoring" feature, so AutoDS does not automatically check your supplier, and there is no monitoring scan. For this reason, the settings of the General tab and "Include shipping price" apply to a product only when you upload it, using the values saved in Supplier Settings at that time.
To bring a product up to date with your supplier, you re-upload it, which creates a new listing with a new product ID, clearing the previous pricing and configuration. If you want AutoDS to automatically monitor price and stock, we recommend the Starter, Advanced, or Enterprise plan.
Frequently asked questions (FAQs)
Where do I find the "Ship to Country" setting?
Where do I find the "Ship to Country" setting?
The "Ship to Country" setting is in the General tab of each supplier, under Supplier Settings. Select the supplier in the supplier list first, because each supplier has its own General tab. Some suppliers do not have the setting because the marketplace already determines the shipping destination, as with Amazon, eBay, and Walmart.
In the AutoDS Marketplace, you choose your destination country with the "Ships To" filter. Learn which suppliers have "Ship to Country" here. If your supplier operates across several regions, such as AliExpress, Alibaba, or Banggood, and the setting is still not there, please let us know the supplier you selected so we can check your account.
How do I keep my products listed in my store when my supplier is out of stock?
How do I keep my products listed in my store when my supplier is out of stock?
To keep your products listed in your store when your supplier is out of stock, turn off "Stock Monitoring" for those products. With "Stock Monitoring" off, AutoDS does not detect or apply your supplier's stock changes, so the quantity in your store stays at the value you set. Because AutoDS does not update stock in this case, we recommend checking your supplier's stock yourself to avoid selling a product they do not have.
You turn off "Stock Monitoring" in one of these ways:
For the products you upload afterward: Turn off "Stock Monitoring" in the Lister tab of Supplier Settings.
For several products already in your store: Select "Yes" in the "Disable stock monitoring" field of "Bulk Edit".
For one product already in your store: Turn off "Stock Monitoring" in the product's "Edit" option.
If you want to keep a selling price exactly as you set it, you can turn off "Price Monitoring" in the same way, because with "Price Monitoring" off, AutoDS does not update your selling price when your supplier changes the price.
On eBay, if you hide a product or change its quantity by hand in Seller Hub while "Stock Monitoring" is on, the next monitoring scan can restore it, because AutoDS relists the product when your supplier has stock. To keep the product hidden without deleting it, turn off "Stock Monitoring" for that product.







